Writing this article just reminded me of something—today marks the 30th anniversary of the Sega Saturn’s release. Tonight, I’m going to play my favorite games to commemorate this meaningful day.
Although I missed the Sega Saturn (SS) era, I’m very grateful for the playing solutions provided by geeks.
In recent years, more and more young players want to play various retro games, and the SS is often discussed. But there’s a practical problem: the interlaced signal output by the SS by default doesn’t match modern LCD devices. Connecting directly will cause screen jitter, interline flickering, and other issues. Back in that era, CRT displays were used, and game development was designed for that environment.
The good news is that a mid-to-low-end CRT display can even be found at a scrapyard for a very low price or even for free.
The bad news is that if you want to fully recreate the experience of that era, mid-to-high-end color monitors cost no less than a brand-new PS5, and their prices keep rising. Even if you use a mid-to-low-end CRT display, you’ll face various display issues. After all, these devices are old, and you need some repair skills—not everyone has that.

Fortunately, geeks have designed an open-source project, the GBS-C (scaler), which is a very cost-effective retro gaming device. I also used an iPad4 portable screen. The GBS-C seller told me that to truly show the charm of scanlines, you should use a console that outputs 240p, like the Saturn or Mega Drive. The effect is much better than high-resolution consoles like the PS2.
Why did I use the GBS-C and iPad4 portable screen?
Many young players in China didn’t experience the SS era. I wanted to learn about games from that era, but I didn’t have the conditions to find a suitable CRT display. A veteran player told me I could try the GBS-C + iPad4 portable screen. Although it can’t perfectly recreate the experience, it offers a very different one.

This means that whether using real hardware or an emulator, the SS’s display quality on modern displays is a downgrade. The setup I’m sharing here is a compromise in many aspects.
Many young players feel the picture looks bad when playing SS directly on LCD displays, and some even miss out on excellent games because of it. I think that’s a pity.
What does the GBS-C do? What cables did I use? Why did I choose this setup?
First, a quick explanation: the display output from the SS era is called interlaced scanning. On modern LCD devices, interlaced scanning doesn’t match well. But in the analog era with limited bandwidth, it was the optimal solution for CRT displays.
The GBS-C doesn’t turn an LCD into a CRT in hardware. Instead, it restores the output signal of the SS-era console. You can think of it as a translator between retro consoles and modern displays. The principle is converting the analog (interlaced) signal from old consoles into a digital (progressive) signal that modern LCDs can recognize, plus adding some scanline effects. This restores the CRT scanline texture and solves the interlaced flickering problem.
The most important thing is that it’s cheap—half the price of an OSSC. Although the scanline effect at 240p/480i low resolutions isn’t as sharp and natural as the OSSC, and there’s a brief black screen when switching resolutions, the effect fully meets my needs. I’m not saying the OSSC isn’t worth buying. You can look up comparison images of them. These are all DIY-able.
Below is a picture comparison between the SS using GBS-C + iPad4 portable screen and an emulator. I specifically used a GBS-C with modified firmware from the seller, which can perfectly enable scanline effects at 480p resolution. Compared to 720p, 480p not only avoids the blurriness caused by secondary scaling on the iPad4 screen, but also perfectly fits a 4:3 screen through the driver board. It’s the best way to balance retro texture and compatibility.
Top: GBS-C + iPad4 (480p output, scanlines enabled) Bottom: Yaba Sanshiro emulator (native resolution, no filter)

Note: The GBS-C’s 480p is the Saturn’s native 240p signal upscaled. The scanlines are simulated by a hardware filter. The emulator side keeps 1x native rendering without any post-processing, so this is a fair comparison of the visual difference “with vs. without scanlines.”
Test game: Real Bout Fatal Fury Special (Sega Saturn version)
Of course, the GBS-C has comprehensive ports. It’s very small but has many ports, and can play various retro consoles. See the pictures for details.

The cables I used are simple—I directly bought a 38 RMB Saturn RGBS cable. The seller said a SCART connector cable gives better input quality.
I bought all these from players in China. Of course, you can DIY them yourself. Prices vary by region. My GBS-C cost 338 RMB. Below are the pictures, for reference only.
I don’t think playing retro consoles has to be expensive. I really admire the talent of various geeks. They combine modern technology with retro games, allowing young players to feel the charm of retro games at a low cost.
Why I chose the iPad4 portable screen: versatile and good-looking
This setup was actually recommended to me by the GBS-C seller. He said it’s cheap, has good screen quality, a 4:3 aspect ratio, and is suitable for retro games. Even if you don’t play games with it in the future, it can still serve as a secondary monitor.
This setup was actually recommended to me by the GBS-C seller. He said it’s cheap, has good screen quality, a 4:3 aspect ratio, and is suitable for retro games. Even if you don’t play games with it in the future, it can still serve as a secondary monitor.
The finished product with touch function costs 250 RMB in China, and it has speakers. Without touch function, it’s even half the price. The modified ports are two USB-C and one Mini HDMI, which is quite modern. He also said you can find a driver board and build one yourself, which would cost much less. The DIY process is interesting.
I chose the one without touch function but with speakers. This price is for reference only.
Note that you’re not actually playing on an iPad4—you’re using its modified screen. I found a retro gaming themed video to show you.
The biggest drawback might be that the screen is too small. The peak brightness is fine for me, but the display isn’t exactly the same as a CRT. I’m just sharing my setup.

Future tinkering plans
What I’m looking forward to now is that the SCART cable for the SS real hardware hasn’t arrived yet. I’m preparing a table with enough space, one GBS-C, two RGBS signal cables (different connectors), two USB cables (power + display), and one HDMI to Mini HDMI cable. Then I can switch between the PS2 and SS. Once my cables arrive, I’ll share the results with everyone. Oh, I also prepared an 88 RMB SCART cable. I heard this connector gives better results, so I’ll test them together.

